Model NO.: 24m Telescopic Beam Bucket Lift truck,
Drive Wheel: 4×2
Engine: 140HP
Fuel Tank(L): 200L
Wheelbase (mm): 3,850mm
 |
 |
 |
 |
Description
BRIEF
The standout feature of the 24m telescopic beam bucket lift truck is its extraordinary height reach. Equipped with a telescopic boom that extends up to 24 meters, this vehicle provides access to areas that were once considered difficult or even impossible to reach. This extended reach opens doors to projects that require work at great heights, from skyscraper maintenance to utility pole installation.
What truly sets this lift truck apart is its versatility. The telescopic boom can be articulated and maneuvered into various positions, allowing workers to access confined spaces, over obstacles, and around obstacles with remarkable ease. This adaptability enhances the lift truck‘s applicability across a multitude of industries, from construction and telecommunications to tree care and event management.
Safety remains a paramount concern in any elevated work scenario. The 24m telescopic beam bucket lift truck incorporates advanced safety features to ensure the well-being of operators and technicians. Stabilization mechanisms, anti-tip technology, and state-of-the-art control systems mitigate risks and instill confidence in users. Moreover, the lift truck‘s efficient design and ease of operation contribute to increased productivity, ultimately saving time and resources.
As environmental consciousness grows, industries are seeking equipment that balances performance with eco-friendliness. The 24m telescopic beam bucket lift truck aligns with this trend, with many models incorporating energy-efficient systems and emission-reducing technologies. This not only helps organizations meet sustainability goals but also demonstrates a commitment to a greener future.
The 24m telescopic beam bucket lift truck represents a significant step forward in high-altitude access technology. Its unprecedented height reach, versatility, safety features, and environmental considerations converge to redefine what is possible in the realm of elevated work platforms. As industries continue to evolve, this innovative solution is poised to play a pivotal role in shaping the future of work at heights.
FEATURES
1. Impressive Reach: The “24m Telescopic Beam Bucket Lift truck” boasts an exceptional 24-meter telescopic beam, allowing it to access and work at elevated heights with precision and ease. This extended reach makes it suitable for a wide range of tasks such as maintenance, construction, and utility work.
2. Versatile Bucket Attachment: Equipped with a versatile bucket attachment, this lift truck provides a secure platform for operators to perform tasks at height. The bucket’s design ensures stability and safety while accommodating various tools and materials needed for the job, enhancing efficiency and productivity.
3. Advanced Telescopic Mechanism: Featuring an advanced telescopic mechanism, this lift truck can extend and retract its boom smoothly and efficiently. The precision in the telescopic motion enables operators to maneuver the bucket with accuracy, even in tight or complex spaces.
4. User-Friendly Controls: The lift truck is designed with user-friendly controls that allow operators to adjust the boom’s height, angle, and position effortlessly. Intuitive controls contribute to improved operator comfort, reduced learning curve, and increased operational efficiency.
5. Safety Features: Safety is paramount in the design of the “24m Telescopic Beam Bucket Lift truck.” It incorporates features such as stabilizers for maintaining balance on uneven surfaces, emergency stop mechanisms, and robust guardrails around the bucket. Additionally, the truck’s stability and load capacity are carefully engineered to ensure secure operation at various heights.
SPECIFICATION
| Model
Engine |
Driving type: 4*2 left hand & right driving Truck Chassis: JMC Diesel 4-stroke direct injection diesel engine, Electronic control Engine model: 4HK1-TC51, Euro 4 -5 emission standard 4-cylinder in-line with water cooling, turbo-charging, and intercooling Maximum output: 192 hp (141 kW) at 2,600 rpm Maximum torque: 510 Nm 1,600 r/min Number of cylinders: Displacement: 5.193 L Specific fuel consumption: 132 g/kWh Engine oil filling quantity: 19 l Cooling system filling quantity (long-term filling): 40 l Thermostat with 71ºC opening begin Single-cylinder air compressor Rigid fan |
|
| Transmission | JMC MLD, Manual | |
| Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange | |
| Front Axle | JMC 3T, Steering with doubleT-cross section beam | |
| Rear Axle | JMC 6T, Pressed axle housing, central single reduction with hub reduction, and with differential locks between wheels and axles. Ratio: 4.1 or 4.33 |
|
Chassis |
Frame: U-profile parallel ladder frame, and reinforced subframe all cold riveted cross members, Manganese steel | |
| Front suspension: leaf spring, hydraulic telescopic double-action shock absorbers, and stabilizer Rear suspension: Leaf semi-elliptic springs, bogie spring, and stabilizer Aluminum fuel tank: 200 L capacity with locking fuel cap, fitted to the off side of the chassis |
||
Brakes |
Service brake: dual circuit compressed air brake Parking brake (emergency brake): spring energy, compressed air operating on the front shaft and rear wheels Auxiliary brake: engine exhaust brake |
|
| Wheels & Tyres | Tire: 235/75R17.5 Radial tire | |
Driver’s Cab |
Standard cab, with 3 seats, 2-arm windscreen wiper system with three speeds, damped adjustable driver’s seat, with heating and ventilating system, exterior sun visor, safety belts, adjustable steering wheel, air horn, 24V USB, with transverse stabilizer, with 4-point support fully floating suspension + shock absorber, Air suspension driver seats |
|
|
Electrics |
Operating voltage: 24 V, negative grounded Starter: 24 V, 5.4 Kw Alternator: 3-phase, 28 V, 1500 W Batteries: 2 x 12 V, 165 Ah Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light |
|
| Instrument Panel | Active check central controller with indicators, with this integral instrument the daily manual checks on the vehicle and combined indicators of compressed air pressure, coolant temperature, engine oil pressure, and battery charging |
|
|
Dimensions mm |
Wheelbase Front-wheel track Rear wheel track Front overhang Rear overhang Approach angle (0) Departure angle (0) Overall length Overall width Overall height |
3,815mm 1,680mm 1,650mm 1,110mm 2,055mm 20mm 17mm 7,000mm 2,270mm 3,700mm |
Weight kg |
Deadweight Maximum Loading Capacity Gross vehicle weight Front axle loading capacity Rear axle loading capacity |
5,380 kg 4,000 kg 9,300 kg 3,000 kg 6,000 kg |
Performance |
Maximum driving speed (km/h) Maximum grade ability (%) Minimum ground clearance (mm) Fuel consumption (l/100 km) |
80km/h 34% 278mm 18 l/100 km |
|
MANLIFT ( China Brand) |
Bucket-rated load: | 280kg |
| Insulation bucket | Yes | |
| Lower arm insulation length | 0.61m | |
| Upper arm insulation length | 4.40m | |
| Rotation platform | 360° continuous rotation, work bucket ±90° | |
| Swing speed | 0~2 r/min | |
| Wire Voltage | 35KV | |
| Maximum Working height | 24m | |
| Operating range at maximum working height | 2.3m | |
| Work bucket maximum operating range | 11.3m | |
| Working height at the maximum working range | 8m | |
| Rated lifting weight | 454kgs | |
| Lifting height by maximum lifting capacity | 18.5m | |
| Lifting weight by maximum lifting height | 454kgs | |
|
(1) Operating system: Two operating systems of work bucket and get off; full hydraulic control system; two operations of getting off and working bucket, the upper control adopts three-dimensional single-handle control, and the operation is simple and convenient. It adopts hydraulic and pneumatic control, is durable, and has excellent insulation performance. (2) Hydraulic system: Full hydraulic proportional control, step-less speed regulation (3) Safety device: Interlocking of upper and lower vehicles, soft leg protection, horizontal leg full extension detection alarm, two-way balancing valve, two-way hydraulic lock, vehicle level. (4) Leveling |
||
FAQs
Q: Are you a trading company or a manufacturing factory?
A: We are both. We have operated our own factory for over a decade and recently established a trading company to better serve our overseas customers. We welcome your inquiries and factory visits.
Q: What is your typical delivery time?
A: Our delivery time usually ranges from 20 to 50 days after receiving the advance payment. The exact timeline depends on the specific items and quantities in your order.
Q: How do you ensure product quality?
A: We maintain strict quality control standards through our ISO9001:2008 certified system. Additionally, our professional Quality Control team conducts thorough inspections to guarantee the excellence of our products.
Q: What are your payment terms?
A: We require a 40% deposit via T/T (Telegraphic Transfer), with the remaining 60% due before delivery. We will provide photos of the products and packaging for your approval before the final payment.
How are your trucks shipped?
A: Large trucks are typically shipped via RORO (Roll-On/Roll-Off) or bulk cargo ships. Smaller vehicles can be transported in containers. Please contact us for a detailed shipping quotation.
Q: Do you offer customized products?
A: Absolutely. We can design and manufacture customized products to meet your specific requirements.
Q: What kind of after-sales service do you provide?
A: We offer a five-year warranty on our products, covering manufacturing defects. If any quality issues arise within this period, we will repair or replace the product at our expense. For issues outside the warranty coverage, we provide after-sales service at the customer’s expense.