38000Liters tank capacity
High-quality mild steel tank material
1-9 compartments of tank optional
13/16tons mechanical/air suspension optional
12pcs 12R22.5 tires
Transporting liquid flammables gasoline, diesel
 |
 |
Description
SUMMARY
To prevent instability in the trailer caused by fluctuating liquid and changes in axle load, a 38000 liter oil semi-trailer is designed with 5 compartments. This is necessary because when the liquid tanker is not full, the liquid moves back and forth in the tank due to a certain gap. If the tank truck has a large capacity, the fluctuation’s kinetic energy is high, and the center of mass changes significantly, leading to a sharp change in the vehicle’s axle load. This can seriously impact the trailer’s stability, particularly when driving uphill.
Without partitions, the liquid would flow to the back of the tank trailer when driving uphill, leading to a significant reduction in the drive shaft weight of the traction motor. This, in turn, would limit the passage of the train and prevent the full utilization of the tractor’s traction. Similarly, when driving downhill, the liquid would flow to the front of the tank, causing changes in the tractor’s axle load, further complicating stability.
FEATURES
1. More economical
Effectively improved transportation efficiency compared with fuel trucks. In the case of the same tonnage, the transportation cost is reduced and the fuel consumption is saved.
2. Safer
Using a high-pressure gas leak test, the tank has the characteristics of high strength, stable center of gravity, safe and stable vehicle transportation, etc.
3. Various pumps optional
Centrifugal pumps, gear pumps, and stainless steel pumps can be selected, which have the characteristics of a large flow rate and fast suction speed.
4. More equipment optional
Single-counter and double-counter flow meters can be selected, and tax-controlled computer fuel dispensers can be installed, with 10-15-meter automatic telescopic return reels, equipped with refueling guns. Edible oil can be measured with an edible oil computer meter.
5. Hot-rolled structural steel
Welded steel longitudinal beam and cross member are assembled and welded for chassis assembly. The finished chassis offers to bend and deform resistance with proper rigidity and strength.
6. Advanced technology
Major parts and components of the trailer are processed by advanced equipment. Longitudinal beams are finished by automatic tracking submerged arc welding machine; all the sub-assemblies are shot-blasted to improve paint adhesiveness and are painted before assembling.
SPECIFICATIONS
|
Model |
CSC9404GYYA |
|
Capacity of Tank |
38000Liters + 3%~5% |
|
Compartment of Tank |
5compartments |
|
Hauling for |
Liquid flammables(gasolines, diesel), Density 0.76 |
|
Overall Dimension |
95000~13000x2500x3900mm(final size based on exact drawing) |
|
Material of Tank |
Mild steel Q235 |
|
Dished End of Tank |
Mild steel Q235,6mm thickness, all single heads dished and flanged |
|
Material and Thickness of Shell of Tank |
Mild steel Q235,5mm thickness |
|
Material and Thickness of Compartment of Tank |
Mild steel Q235,4mm thickness |
|
Material and Thickness of Anti-wave Baffle |
Mild steel Q235,4mm thickness |
|
Main Beam |
Standard heavy-duty frame welded on the bottom of the tank |
|
Roll-over Coaming |
Full-length roll-over coaming for anti-fall projection on both sides of top of the tank |
|
Hydrostatic Test |
Pressure testing, hydrostatic @ 35kpa(5psi) each compartment of tank |
|
Painting |
All steel sandblasted and epoxy zinc phosphate primer and polyurethane finish painting(anti-corrosion) painted, with the client’s logo. |
|
Manhole Cover of Tank |
5 sets diameter 500mm anti-explosion safety manhole cover with breather valve |
|
Discharge Valve |
5 sets 3” ball valve for discharging, lockable box for discharge valve |
|
Bottom Valve(Emergency Valve) |
5 sets pneumatically controlled emergency valves, valve fitted with valve operator |
|
Hose and Hose Tray |
2pcs hose trays to fit 3” 6m hose |
|
Water Drain Pipe |
The water drain rubber pipe from the top of the tank provided |
|
Kingpin |
50# or 90# kingpin, 12mm thick mild steel plate fabrication |
|
Landing Gear |
1 set 28tons landing gear with two-speed manual operation type |
|
Axle |
3 sets 13 tons FUWA brand axles, with ABS |
|
Suspension |
Mechanical Reinforced Multi-Leaf Spring. Suspension frame Mild steel fabricated for heavy-duty usage, plate spring upset. Air Suspension optional |
|
Brake System |
Dual line air brake system comprising of contact type coupling, brake chamber, emergency valve, and air reservoir |
|
Tires |
12R22.5, 12pcs+1spare |
|
Rims |
9.0*22.5 steel tubeless rims 12pcs |
|
Access Ladder |
A detachable steel ladder mounted at the rear of the tank |
|
Catwalk |
Anti-skid catwalk fitted with steel grating |
|
Safety Handrail |
Manual-operated collapsible handrail fixed on top of the tank |
|
Side Guard |
Steel side guards were provided on both sides of the tank |
|
Tool Box |
1set lockable toolbox |
|
Mudguard |
The whole piece of steel plates |
|
Rear Bumper |
Steel bumper with light assembly and number plates |
|
Fire Extinguisher |
2pcs 8kg dry powder fire extinguisher |
|
Anti-static System |
Earthing strip installed at the rear of the tank, 1pc grounding bounding reel |
|
Light and Wiring |
Standard front, side, and rear of the tank |
|
24v, 7 wires ISO socket |
|
|
Brake light, reverse light, direction indicator, LEF tail lamp |
|
|
8pcs side marker lamp |
|
|
Reflective Tapes and Sticker |
CSCTRUCK standard |
FAQs
Q: Are you a trading company or a manufacturing factory?
A: We are both. We have operated our own factory for over a decade and recently established a trading company to better serve our overseas customers. We welcome your inquiries and factory visits.
Q: What is your typical delivery time?
A: Our delivery time usually ranges from 20 to 50 days after receiving the advance payment. The exact timeline depends on the specific items and quantities in your order.
Q: How do you ensure product quality?
A: We maintain strict quality control standards through our ISO9001:2008 certified system. Additionally, our professional Quality Control team conducts thorough inspections to guarantee the excellence of our products.
Q: What are your payment terms?
A: We require a 40% deposit via T/T (Telegraphic Transfer), with the remaining 60% due before delivery. We will provide photos of the products and packaging for your approval before the final payment.
How are your trucks shipped?
A: Large trucks are typically shipped via RORO (Roll-On/Roll-Off) or bulk cargo ships. Smaller vehicles can be transported in containers. Please contact us for a detailed shipping quotation.
Q: Do you offer customized products?
A: Absolutely. We can design and manufacture customized products to meet your specific requirements.
Q: What kind of after-sales service do you provide?
A: We offer a five-year warranty on our products, covering manufacturing defects. If any quality issues arise within this period, we will repair or replace the product at our expense. For issues outside the warranty coverage, we provide after-sales service at the customer’s expense.