15000 Liters Vacuum Skid Mounted System Description: This Vacuum Truck is designed to collect, by suction, and transport sewage and sludge. Vacuum Sewer mount based on FUSO 4×2 truck chassis with sewage pump consists of a sub frame connected to the truck chassis, a cylindrical tank, a…
 |
 |
 |
Description
15000 Liters Vacuum Skid Mounted System
Description: This Vacuum Truck is designed to collect, by suction, and transport sewage and sludge. Vacuum Sewer mount based on FUSO 4×2 truck chassis with sewage pump consists of a sub frame connected to the truck chassis, a cylindrical tank, a hydraulically opening full diameter tailgate and the vacuum system powered by the PTO.
Application:
The vacuum truck is intended for vacuum cleaning of cesspools and transportation of fecal liquids to disposal area. Special equipment must consist of the tank, driven vacuum pump, signal-safety device, receiving manhole with suction hose, control valves on the pipeline, platforms and additional electrical equipment. Filling of the tank is carry out under the impact of vacuum which is produced by vacuum pump, tank gravity discharge or air pressure from the vacuum pump.
Features
Hydraulic Open Rear Lid
1) Large (4 inch) Stainless Steel Discharge Valve with Male Flange Connects
2) Rear Tank Skirt, avoid secondary pollution.
3) Heavy Duty Wing Clamps.
4) Checking Window.
Tipping Tank
1) Double Acting Cylinders on Both Side, Spool valve body control of rear door, hoist and vibrator.
2) Acrylic Sight Glass
3) Release Valve. Prevent Overfill
4) Climb Ladder, 25mm tubular handrails
5) Tire Carrier.
Hose and Pipes
1) Large Suction Tubes, Elbows and Valve fittings (Stainless Steel Available)
2) Check Steel Hose Tray and Side Marker Lamps.
3) Reliable Double Acting Cylinders by Chinese Top-Quality Suppliers.
4) Pump Work Station, Gauges and Controls
5) Heavy Duty Tank Pads.
6) Different Sized 2″,2.5″3″ Suction Hose Connected.
Vacuum Truck Parameters
|
1)CHASSISBRAND/MODEL |
This 1500 & 2000Liters Skid Mounted Sewer System suitable for mounted on FUSO FE71CBN4R&FE73CE6R truck chassis orequivalent |
Wheel Drive |
4×2 |
|
2) EMPTIER TANK |
Material |
Stainless Steel, Grade SUS304, |
|
|
Tank Style |
Cylindrical type, equipped with splash walls/ baffle plates and reinforced around circumference. Two heavy-duty hinges support the tank’s rear door. |
||
|
Coating |
specialized internal chemical coating |
||
|
Filling Level Indicator |
Indicator mark on the tank for maximum and minimum level of Acrylic Sight Glass furnished |
||
|
Loading & Unloading |
· Tailgate tightly locked, two suitably dimensioned double acting hydraulic cylinders affect raising and lowering of the door.The door be raised through a minimum angle of 80° to the vertical. Locking and sealing of the rear door be done by hand wheel operated bolts, which of a robust design located circumferentially on the tank’s rear end of the shell. · Provided Vacuum limiting valve and drain-off valve · Outlet from tank provided with a quick connect coupling interface. |
||
|
3) VACCUM PUMP |
Model/Make |
PM60A /Italy MORO |
|
|
Type |
Heavy duty Rotary blade/vane type |
||
|
Cooled |
Air |
||
|
Free Air Flow |
7200 liters/ min (432m3/hour) |
||
|
Continuous Duty Vacuum |
80%, 23.6 in Hg |
||
|
Max Vacuum |
95%, 28 in Hg |
||
|
Max. Operating Absolute Pressure |
3 bar, |
||
|
Power required at max vacuum |
9kw, 12.2hp |
||
|
Power required at max Pressure |
18kw, 24.5hp |
||
|
Oil tank capacity |
1.7liters |
||
|
Max. Speed |
1400rpm |
||
|
Working Speed |
1000-1100rpm |
||
|
Vacuum Suction Depth |
6m |
||
|
Performance Curve |
|||
|
Overflowing |
Air pump to safeguard pump from overflowing Sludge tank between the air pump and the tank. |
||
|
Installation |
The location of the pump installed very accessible for routine and overhaul maintenances. it installed by the left side of the emptier tank. |
||
|
Control |
Four-way-cock for suction and pressure manually controlled, safety valve for maintenance of the pressure. Adjusted pressure 0.5 bar. |
||
|
Safety Device |
Safety devices for overflow protection of the vacuum pump: 1, Primary shut-off valve 2, Secondary shut-off valve 3, Air safety filter, 4, Vacuum relief valve 5, Pressure relief valve 6, Vacuum pressure gauge 7, Silencer (Oil catch muffler) |
||
|
4) SUCTION HOSE |
Material |
PVC along with quick connect coupling |
|
|
Type |
Non-collapsible flexible |
||
|
Diameter |
Internal 75mm |
||
|
Length |
40 meter length with standard fitting & couplings shall be provided with the unit |
||
|
Hose Tray |
Two hose trays each one in left and right, made of galvanized steel, Lockable storage compartments for hoses and other equipment along both sides of the tank |
||
|
5) COLOR |
to be confirmed during the contract agreement. |
||
|
6) INSTRUMENTATION |
Temperature Gauge |
Manufacturer standard Provided |
|
|
Pressure Gauge |
Manufacturer standard Provided |
||
|
Level Control |
Manufacturer standard Provided |
||
|
7) WATER TANK |
Capacity |
25L |
|
|
Material |
plastic with soap dispenser |
||
|
Purpose/Application |
for hand cleaning |
||
Hot Tags: 1.5cbm vacuum skid mounted system, China, manufacturers, suppliers, factory, price, quotation, for sale, high quality, high performance
FAQs
Q: Are you a trading company or a manufacturing factory?
A: We are both. We have operated our own factory for over a decade and recently established a trading company to better serve our overseas customers. We welcome your inquiries and factory visits.
Q: What is your typical delivery time?
A: Our delivery time usually ranges from 20 to 50 days after receiving the advance payment. The exact timeline depends on the specific items and quantities in your order.
Q: How do you ensure product quality?
A: We maintain strict quality control standards through our ISO9001:2008 certified system. Additionally, our professional Quality Control team conducts thorough inspections to guarantee the excellence of our products.
Q: What are your payment terms?
A: We require a 40% deposit via T/T (Telegraphic Transfer), with the remaining 60% due before delivery. We will provide photos of the products and packaging for your approval before the final payment.
How are your trucks shipped?
A: Large trucks are typically shipped via RORO (Roll-On/Roll-Off) or bulk cargo ships. Smaller vehicles can be transported in containers. Please contact us for a detailed shipping quotation.
Q: Do you offer customized products?
A: Absolutely. We can design and manufacture customized products to meet your specific requirements.
Q: What kind of after-sales service do you provide?
A: We offer a five-year warranty on our products, covering manufacturing defects. If any quality issues arise within this period, we will repair or replace the product at our expense. For issues outside the warranty coverage, we provide after-sales service at the customer’s expense.