The VST-9000-MHI Electric Utility vehicle includes the following components and functions.
Single handle control on the upper part of the working bucket(upper and lower boom lift, lower, turntable rotation), including safety trigger function and emergency stop/drain valve.
Remote engine start/stop, upper and lower control, 24V.
The bottom turntable rotates 360 degrees continuously in both directions.
38L/min flow, open hydraulic system. Pressure: 205kg/cm².
 |
 |
 |
 |
Description
BRIEF
Bucket trucks serve a vital role across various industries, including local telecommunications and utilities, facilitating tasks like power line maintenance. These trucks come in diverse sizes and configurations, tailored to address electrocution risks inherent in tasks involving electrical infrastructure like wiring, cables, and poles. Their versatility significantly streamlines operations, enhancing efficiency and safety standards.
Primarily utilized by power linemen, bucket trucks enable them to execute their duties comfortably and securely. These professionals rely on such equipment, especially in environments featuring steel or concrete poles. The utilization of bucket trucks not only ensures the smooth execution of tasks but also minimizes potential hazards associated with working at heights and around live electrical components.
In essence, bucket trucks represent a cornerstone of modern utility and telecommunications operations, offering a safe and efficient means of accessing elevated workspaces and conducting maintenance tasks. Their prevalence underscores their indispensability in industries where worker safety and operational efficiency are paramount concerns. Whether it’s repairing power lines or conducting routine inspections, these specialized vehicles facilitate seamless workflow, contributing to the overall reliability and functionality of essential infrastructure networks.
FEATURES
The VST-9000-MHI Electric Utility vehicle boasts an array of components and functionalities, including:
Convenient single-handle control located atop the working bucket, facilitating upper and lower boom lift, lower movement, and turntable rotation. Equipped with a safety trigger function and an emergency stop/drain valve.
Remote engine start/stop and 24V upper and lower control capability.
360-degree continuous rotation of the bottom turntable in both directions.
Open hydraulic system with a flow rate of 38 L/min and pressure up to 205kg/cm².
Side-mounted telescopic upper boom enabling retraction of the working bucket at a low position.
Upper FRP insulation boom measuring 3,000mm in length.
Lower boom insulation section (chassis protection system)measuring 610mm.
Inner surfaces of the insulating boom and section are coated with a wax compound to prevent moisture accumulation, while the outer surface features gel paint. The glass fiber-reinforced plastic resin contains an anti-ultraviolet inhibitor.
The entire system employs non-lubricated bushings.
Hydraulic tool interface integrated into the working bucket.
Integral hydraulic oil tank with a capacity of 95 liters and 2 viewing windows.
Fiberglass working bucket (with steps) designed for 2 individuals, measuring 610×1,220×1,070mm.
Working bucket capable of 180º horizontal rotation and tipping.
Fully insulated telescopic boom with a voltage withstand capability of ≥220KV.
Master/slave hydraulic leveling function, including upper control dumping function for cleaning the work bucket and personnel rescue.
Upper boom storage rack equipped with fixing straps and bucket support.
Inclusive of all necessary hardware.
Comes with 2 sets of operation and maintenance manuals in Chinese and English.
Manual throttle control operating at 24V.
Emergency hydraulic system operating at 24V DC.
Manual hydraulic jib crane with a maximum load capacity of 454kg.
Supplied with a set of spare air tubes painted white by TIME.
Design safety factor of steel structure: ≥ 3 and insulation material: ≥ 8.
Features 1 roof engineering emergency light.
Includes 1 upper and one lower insulating arm cover.
Comes with a pair of walkie-talkies.
Supplementary items such as test strips, top arm cable, aluminum lining, corona ring, and microammeter are included.
Bucket Truck
90 ft Insulated Articulated/Telescopic Material Handler
Industries Served
Electric Power Distribution, Electric Power Transmission, Electric Utilities
Type
Articulated Telescopic, High Access
Height Range
65ft – 100ft
Model Series
HIGH ACCESS, VST
Working Chart
SPECIFICATIONS
|
BODY ASSEMBLY |
|
|
TYPE |
ARTICULATED TELESCOPIC, HIGH ACCESS |
|
MODEL |
VST-9000MHI |
|
MAKE |
VERSALIFT(USA) |
|
DIMENSION |
|
|
Overall length |
12,050mm |
|
Overall width |
2,490mm |
|
Overall height |
3,990 mm |
|
Wheelbase |
4,625+1,350mm |
|
Front track |
2,022mm |
|
Rear track |
1,830mm |
|
Front overhang |
1,500mm |
|
Rear overhang |
2,900mm |
|
WEIGHT |
|
|
GVW |
25,000kg |
|
TARE WEIGHT |
11,050kg |
|
Axle load distribution |
7,000/18,000kg (tandem axle) |
|
PERFORMANCE |
|
|
Working Height |
30m |
|
Height to Bottom of Platform |
28.3m |
|
Horizontal Reach |
17.07 m |
|
Stowed Travel Height |
3.66 m |
|
Platform Capacity |
317.51 kg |
|
Insulated or Non-insulated |
Insulated |
|
Material Handling |
Yes |
|
Working Voltage |
10-220kV |
|
Working Temperature |
-40 ºC – 45 ºC |
|
Humidity |
≤95% |
|
Workable at an Air velocity |
6-level wind speed |
|
Platform Lifting Time |
67s |
|
Platform Lifting Speed |
0.22m/s |
|
Platform Dropping Time |
51s |
|
Platform Dropping Speed |
0.3m/s |
|
HYDRAULIC SYSTEM |
|
|
Hydraulic Controls |
Full Hydraulic |
|
Operating Pressure |
3000 psi (210.92 kg/cm²) |
|
Flow Rate |
10 gpm (37.85 lpm) |
|
Filtration |
10 micron return | 100 mesh suction |
|
System Type |
Open Center |
|
Power Source |
PTO Pump |
|
BOOM |
|
|
Inner/Outer Boom Articulation |
-25º – 85º |
|
Lower Boom Articulation |
0º – 88º |
|
Inner Boom Extension |
198 in (5.03 m) |
|
Insulated Boom Length |
3m |
|
CHASSIS TRUCK |
|
|
TYPE |
6×4 Drive |
|
MODEL |
HOWO 340 |
|
MAKE |
SINOTRUK |
|
PERFORMANCE |
|
|
Min. Ground Clearance |
258mm |
|
Max.Gradeability |
28.5% |
|
Approaching Angle |
32 º |
|
Departure Angle |
13 º |
|
Min. Turning Radius |
22m |
|
Max. Speed |
95km/h |
|
ENGINE |
|
|
Make |
SINOTRUK |
|
Model |
D10.34-40 |
|
Type |
4 stroke, 6 Cylinders, intercooler, Turbocharged diesel engine |
|
Emission Standard |
EURO 4 |
|
Power |
249kW (340hp) @ 2500rpm |
|
Max Torque |
-960N.m@1500rpm |
|
Displacement |
9.7L |
|
STEERING |
|
|
Model |
ZF8098 |
|
Type |
hydraulic steering with power assistance |
|
Drive Position |
Left Hand drive |
|
TRANSMISSION |
|
|
Model |
HW13710, Manual |
|
Gear Numbers |
10 forward&2 reverse |
|
PTO |
HW70 |
|
TYRE |
|
|
Size |
295/80R22.5 |
|
Numbers |
11 pieces(1 spare) |
|
ELECTRICAL |
|
|
Battery |
2X12V/165Ah |
|
Alternator |
28V-1500kw |
|
Starter |
7.5Kw/24V |
|
CAB |
|
|
Model |
HW76 |
|
Type |
Sleeper Cab |
|
Equipment |
AC, heating |
|
Capacity |
3 including driver |
|
Color |
Yellow |
CSCTRUCK INSTALLATION
– Mounting auxiliary beams, power take-offs, and hydraulic pumps;
– Attaching VST-9000 MHI bucket body imported from Mitsubishi Heavy Industries onto a SINOTRUK chassis truck.
– Fitting H-shaped outriggers;
– Installing the outrigger control valve;
– Adding toolboxes on both sides;
– Employing imported anti-rust materials and processes for painting the chassis and toolboxes;
– Conducting insulation tests by the China Electric Power Research Institute according to national standards before leaving the factory, with certificates issued and tests subject to purchaser supervision.
ON-BOARD SPARE PARTS AND TOOLS
1) Working bucket cover, insulating arm cover
2) 1 spare tire
3) 2 seat belts
4) 4 outrigger pads
5) A set of inch tools (1 set each for opening/plum blossom and inner hexagon)
6) A set of Isuzu on-board tools
Hot Tags: 30m insulated cable placer bucket vehicle, China, manufacturers, suppliers, factory, price, quotation, for sale, high quality, high performance
FAQs
Q: Are you a trading company or a manufacturing factory?
A: We are both. We have operated our own factory for over a decade and recently established a trading company to better serve our overseas customers. We welcome your inquiries and factory visits.
Q: What is your typical delivery time?
A: Our delivery time usually ranges from 20 to 50 days after receiving the advance payment. The exact timeline depends on the specific items and quantities in your order.
Q: How do you ensure product quality?
A: We maintain strict quality control standards through our ISO9001:2008 certified system. Additionally, our professional Quality Control team conducts thorough inspections to guarantee the excellence of our products.
Q: What are your payment terms?
A: We require a 40% deposit via T/T (Telegraphic Transfer), with the remaining 60% due before delivery. We will provide photos of the products and packaging for your approval before the final payment.
How are your trucks shipped?
A: Large trucks are typically shipped via RORO (Roll-On/Roll-Off) or bulk cargo ships. Smaller vehicles can be transported in containers. Please contact us for a detailed shipping quotation.
Q: Do you offer customized products?
A: Absolutely. We can design and manufacture customized products to meet your specific requirements.
Q: What kind of after-sales service do you provide?
A: We offer a five-year warranty on our products, covering manufacturing defects. If any quality issues arise within this period, we will repair or replace the product at our expense. For issues outside the warranty coverage, we provide after-sales service at the customer’s expense.