APPLICATION Pig Farm/Chicken Farm/Feed mill/Etc. DESCRIPTION Feed delivery truck, also called bulk feed transport truck, is a special vehicle mainly used to transportation of bulk feed, powder feed, non-corrosive bulk material, pharmaceutical powder and grain feed from the truck to the silo. It…
 |
 |
 |
 |
Description
APPLICATION
Pig Farm/Chicken Farm/Feed mill/Etc.
DESCRIPTION
Feed delivery truck, also called bulk feed transport truck, is a special vehicle mainly used to transportation of bulk feed, powder feed, non-corrosive bulk material, pharmaceutical powder and grain feed from the truck to the silo. It could storage pellet feed and mash feed. Every tank has 2-4 compartments, it could load different feed.
Bulk Feed Truck
Capacity of Silo 44CBM
Model Number: CSC5314ZSLDL3
Model Year :2021
OPTIONS
Hand Hold Remote Control
Aluminum Tank
TANK select material thickness 5mm
Manufacturer Specification
APPLICATION
Pig Farm/Chicken Farm/Feed mill/Etc.
DESCRIPTION
Feed delivery truck, also called bulk feed transport truck, is a special vehicle mainly used to transportation of bulk feed, powder feed, non-corrosive bulk material, pharmaceutical powder and grain feed from the truck to the silo. It could storage pellet feed and mash feed. Every tank has 2-4 compartments, it could load different feed.
BODY FEATURES
All-welded aluminum alloy tank, base and bulkheads.
The hermetic transportation of bulk feed can reduce loss, keep quality and avoid pollution.
Continuous operation increases work efficiency.
Quality hydraulic pump and hydraulic motor
Convenient to operate, and easy to maintain.
AUGER/HYDRAULICS
1 no. of 12” floor auger, steel tube , steel auger
2 no. of hydraulic motor driven in front and rear of the tanker
16” vertical auger, 1 no. of hydraulic motor drive gear flange on vertical auger tube 180 degree rotation
12” discharge auger in tank top, full length with tank. With hydraulic cylinder lifting
Driver side Rear mount control valves with aluminum valve box with manual or remote control(optional)
Rear pit discharge on the floor auger
1 no. DENISON Direct couple tandem pumps
4 no. of EATON auger motors.
1 no. of Big volume reservoir with filters, with 1 no. of radiator
1 no. of Controls box located at the driver’s side
1 no. of Manufacturer original power take-off.
1 no. of climb ladder in the rear tank
4 no. Monoblock valve in the control box
Manual open/closed Compartment Gates
Front 2 no. (handle marked 1, 2 for #1 and #2 compartments)
Rear 2 no.(handle marked 3,4 for #3 and # 4 compartments)
4 no. of top square loading port with cover and locks
Aluminum alloy tank manufacturing
Specification
|
Model Number/Line |
CSC5314ZSLDL3 |
|||||||||||||
|
Drive type |
8X4 Tank Truck Lorry |
|||||||||||||
|
Color |
Optional |
|||||||||||||
|
Cabin |
All steel construction, forward tilting |
|||||||||||||
|
Equipment’s |
all gauges and meters to be indicated in metric unit, adjustable seats with seat belts, sleeper, steering wheel, mud flap, hand holds |
|||||||||||||
|
Kerb mass(kg) |
12505kg (approx.) |
|||||||||||||
|
GVW (kg) |
30600kg |
|||||||||||||
|
Dimensions |
11980mm×2550mm×3980mm |
|||||||||||||
|
Wheel base(mm) |
1950+4250+1300mm |
|||||||||||||
|
Engine |
Cummins Dongfeng L315 30 |
|||||||||||||
|
Power(hp) |
315hp |
|||||||||||||
|
Displacement(L) |
8.9L |
|||||||||||||
|
Max. torque |
1200N·m |
|||||||||||||
|
Emission Standard |
EURO3 |
|||||||||||||
|
Transmission |
FAST 12JS160T |
|||||||||||||
|
Max. torque |
1600N.m |
|||||||||||||
|
Gear Shift |
12 driving gear,2 Reverse gear, manual transmission |
|||||||||||||
|
Speed Ratios |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
R1 |
R2 |
|
15.53 |
12.08 |
9.39 |
7.33 |
5.73 |
4.46 |
3.48 |
2.71 |
2.10 |
1.64 |
1.28 |
1.00 |
14.86 |
3.33 |
|
|
Clutch |
||||||||||||||
|
Diameter（mm） |
Φ430 |
|||||||||||||
|
Suspension |
||||||||||||||
|
Front Suspension |
Leaf spring |
|||||||||||||
|
Rear Suspension |
Leaf spring |
|||||||||||||
|
Axles |
||||||||||||||
|
Front axle |
Double 5T axles, loading capacity: 6400kg/6400 kg |
|||||||||||||
|
Rear axle |
Double axles, loading capacity: 17800KG |
|||||||||||||
|
Ratio |
4.44 |
|||||||||||||
|
Brake |
||||||||||||||
|
Running brake |
Dual circuit compressed air brake |
|||||||||||||
|
Parking brake |
Spring energy compressed air brake |
|||||||||||||
|
Assistant brake |
Engine exhaust brake |
|||||||||||||
|
Wheel & Tire |
||||||||||||||
|
Tyres |
Tire number: 12pcs Size: 11.00R20 |
|||||||||||||
|
Fuel tank |
||||||||||||||
|
Tank capacity(L) |
350L |
|||||||||||||
|
Standard |
Steel |
|||||||||||||
|
Silo Weldment |
Aluminum alloy |
|||||||||||||
|
Tank Body Size |
8000×2480×2150mm |
|||||||||||||
|
Capacity |
31 m3 |
|||||||||||||
|
Tank Shell Thickness |
3 mm |
|||||||||||||
|
Rear/End Lib Thick |
3mm |
|||||||||||||
|
Tank Inner Baffle Thick |
3mm |
|||||||||||||
|
No. of Compartments |
4 |
|||||||||||||
|
Discharge speed(m3/h) |
≥120 |
|||||||||||||
|
Max Transport Height (m) |
≥9.5 |
|||||||||||||
|
Max Transport Length (m) |
≥8.5 |
|||||||||||||
|
Conveying capacity（Kg/min） |
1000 |
|||||||||||||
|
Residue rate (%) |
≤0.022% |
|||||||||||||
|
Bracing Support No. |
10 |
|||||||||||||
|
Rotation |
180°(left and right) |
|||||||||||||
Hot Tags: 44cbm bulk feed truck, China, manufacturers, suppliers, factory, price, quotation, for sale, high quality, high performance
FAQs
Q: Are you a trading company or a manufacturing factory?
A: We are both. We have operated our own factory for over a decade and recently established a trading company to better serve our overseas customers. We welcome your inquiries and factory visits.
Q: What is your typical delivery time?
A: Our delivery time usually ranges from 20 to 50 days after receiving the advance payment. The exact timeline depends on the specific items and quantities in your order.
Q: How do you ensure product quality?
A: We maintain strict quality control standards through our ISO9001:2008 certified system. Additionally, our professional Quality Control team conducts thorough inspections to guarantee the excellence of our products.
Q: What are your payment terms?
A: We require a 40% deposit via T/T (Telegraphic Transfer), with the remaining 60% due before delivery. We will provide photos of the products and packaging for your approval before the final payment.
How are your trucks shipped?
A: Large trucks are typically shipped via RORO (Roll-On/Roll-Off) or bulk cargo ships. Smaller vehicles can be transported in containers. Please contact us for a detailed shipping quotation.
Q: Do you offer customized products?
A: Absolutely. We can design and manufacture customized products to meet your specific requirements.
Q: What kind of after-sales service do you provide?
A: We offer a five-year warranty on our products, covering manufacturing defects. If any quality issues arise within this period, we will repair or replace the product at our expense. For issues outside the warranty coverage, we provide after-sales service at the customer’s expense.