Model:CSC5200GXFSG
Driving type:4×2, RHD
Overall size:8445x2500x3610mm
G.V.W:20,000kg
 |
 |
 |
Description
Description
Supply of city type fire truck complete with standard firefighting and rescue accessories, mounted on the right-hand drive chassis (Nepal drive standard) and designed for effective firefighting in high-risk areas.
The fire performance of the fire truck meets the requirements of GB7956 Fire Truck Standard, ISO9001, ISO14001 and ISO45001 Quality Control Certification; the chassis has passed the national compulsory product certification. The fire pumps and fire monitors equipped have passed the inspection of the National Fire Equipment Supervision and Inspection Center; the fire interface meets the GB12514-2006 standard; the whole vehicle has passed the 3C certification and conforms to the truck. The relevant regulations on the license plate of the vehicle. 28 years’ experience for fire truck manufacturing.
Specifications
|
General |
|
|
Model |
CSC5200GXFSG |
|
Driving type |
4×2, RHD |
|
Overall size |
8445x2500x3610mm |
|
G.V.W |
20,000kg |
|
Curb weight |
11,300kg |
|
Full pay loading |
8,550kg |
|
Ground clearance |
450mm(approx.) |
|
Steering |
Power assisted/power steering |
|
Speed |
95km/hr |
|
Wheelbase |
4600mm |
|
Steering Make/Model |
ZF /ZF8098 manual |
|
Brakes |
Pneumatic brake with ABS and Parking |
|
Suspension |
Multi-leaf springs 10/9+6 |
|
Tire |
Total six wheels(front two and rear four wheels). With one set extra tyre All six wheels are tubeless tyre Tyre specification: 315/80R22.5 |
|
Engine |
|
|
Make/Model |
SINOTRUK/ D10.31.50 |
|
Output Power@ speed |
310hp@1900rpm |
|
Displacement |
9.726L |
|
Max. torque @ Speed |
1390N.m@ 1200-1500rpm |
|
Emission standard |
Euro 5 |
|
Bore x stroke |
126x130mm |
|
Mini. Fuel consumption rate at full load |
189g/kw.h |
|
Type |
water cooled, turbo charged, diesel, In-line six-cylinder, four-stroke, high pressure common rail |
|
Equipped |
fully equipped with accessories for the efficient full load operation of the Fire Truck |
|
located |
Is at front side of the vehicle |
|
Transmission |
|
|
Make/Model |
SINOTRUK/ HW19710 |
|
Max. input torque |
1900N.m |
|
Gears |
10F+2R |
|
Operation |
Manual |
|
Cabin |
|
|
Structure |
Flat, 4 doors Crew cab |
|
Passenger No. |
2+4 (a crew of SIX 06 persons including the driver) |
|
Equipment |
With safety seatbelts and head rests in the cabin and anti-slip floor. Standard chassis accessories Standard vehicle instruments / indicators Two doors service at each side Four breathing apparatus installed 100w siren, long line fire lights, marker lamp, outline marker lamp, PTO and so on |
|
Tilting type |
Double cabin (Hydraulically) operated tilting driver’s cab |
|
Air conditioner |
Air conditioner is provided for driver’s cabin |
|
Radio communication unit |
Two handy talkie Radio communication installed on the vehicle dashboard with microphone and antenna |
|
Windshield |
Front shield: single piece laminated glass |
Tankers’ Specifications
|
Water Tank |
|
|
Capacity |
3000 Liters |
|
Material |
High grade stainless steel 304 |
|
Thickness |
Bottom thickness: 4mm Side wall thickness: 4mm Front & rear wall thickness: 4mm Top thickness: 3mm Anti-wave thickness:3mm |
|
Design |
The surface can be walked on and is provided with anti –slip cover and with sufficiently dimensioned manhole cover, an overflow and a suction pump with drain outlet and ball cock. |
|
Equipment |
1 X 4 ” water tank to fire pump suction connection with butterfly valve 1 X Ø 2 ½ ” hydrant filling connection with male instantaneous connection 1 X Ø 2 ½ ” Overflow and breather line, design to minimize water loss and discharge away from the chassis 2 X Ø 2 ½ fire pump to water tank filling connection, with ball valves 1 X Manhole of Ø500mm each with cap 1 X Electric level gauge |
|
Foam Tank |
|
|
Capacity |
500 Liters |
|
Material |
High grade stainless steel 304 |
|
Thickness |
Bottom thickness: 4mm Side wall thickness: 4mm Front & rear wall thickness: 4mm Top thickness: 3mm Anti-wave thickness: 3mm |
|
Design |
Mainly is suitable for all foam concentrate The foam tank fitted with around the pump foam proportioning system for mixing of water and foam at desirable ratios. |
|
Equipment |
1 X Filling connection, lockable with blank caps, tight coupling and removable stainless-steel strainer, lockable 1 X Over flow with acration and d-acration 1 X suction connection to proportioning unit, lockable 1 X Manhole of Ø300 mm with cap 1 X Electric level gauge 1 X Foam concentrate level Gauge 1 X Drain outlet Valve |
Fire pump
|
Fire Pump |
|
|
Brand |
USA HALE |
|
Model |
Prima P2 4010 |
|
Type |
The Centrifugal pump is mounted at the rear of the vehicle |
|
Material |
Casting (impeller, pump cover, pump housing) are made from light aluminum alloy sea water resistance. The pump shaft and split water rings are made from stainless steel. |
|
Driven by |
Power Take – Off (PTO), Full torque fly wheel PTO through vehicle engine or gear box |
|
Capacity |
4200L/min at 10 bar (throw range 60meter). Its suction and discharging water with 10 ft. lift within 30 seconds through a 20 ft suction hose. |
|
Priming |
Automatic priming System-vacuum pump |
|
Outlet pressure |
1.0MPa/4.0MPa |
|
Max. depth of sucking water |
7m |
|
Max. vacuum |
≥85kpa |
|
Speed of pump |
As per manufactured standard |
|
Control |
All switching for pump operation is installed at the operator’s stand at the rear of the Vehicle |
|
Standard |
Fire pumping standard meets and comply with reference standard of EN 1028 |
|
Fire Hose & Reel |
|
|
Diameter |
25mm |
|
Length |
50m |
|
Max. working pressure |
40kg/cm2 |
|
Rewinding system |
It is electrical rewinding system and manual emergency rewinding by gear |
|
Equipped |
quick attack |
|
Nozzles |
variable flow rate and fog-jet-type |
Foam system
|
Water & Foam Monitor |
|
|
Brand |
China Chengdu |
|
Model |
PL64 |
|
Capacity |
3840L/min |
|
Type |
Normal standard water and foam monitor, equipped with a foam aspirating tube |
|
Control |
Manual (operated from the monitor platform) |
|
Elevation angle |
≤70° |
|
Depression angle |
≥-30° |
|
Rotation angle |
≥360° |
|
Foam Admixing System |
|
|
Make/Model |
CHINAFIRE/ PHA125B |
|
Capacity |
1200~7500 l/min |
|
Pressure |
0.6~1.2Mpa |
|
Mixing Rate |
1%~10%(The maximum proportioning rated output is 3000 l/min and up to 6% foam concentrate can be admixed to the extinguishing water). |
|
Type |
Automatic / electrical control (with manual emergency) |
|
Design |
The foam concentrate is sucked from the tank and mixed with the extinguishing water according the ejector pump principle. By the control cock at the pump proportional the suction quantity of the foam concentrate can adjust. |
Frame Body
|
Overall Layout |
The front and two sides of the middle of the body are storage compartments. The aluminum alloy shutters are installed at both sides of the body and the back of the pump compartment. The roof can be walked – on and is padded with riffled aluminum plates for safety reasons the roof is surrounded with a stainless handrail. Two lockers on each side provided with aluminum roller shutter. Two lockers on each side provided with drains and vents. |
|
Technological Requirements |
All welding panels and skeleton steels are through strict process of anti-rust and anti-corrosion. After completing welding of the tank, the tank will be clear up and removed possible defects such as empty solder. And then it will be through 24-hour hydrostatic test to assure no leakage. |
|
Material |
The outer frame of the body are all high quality Q235A(while water tank and foam tanks are stainless steel), the inner frame use high strength aluminum alloy, the bottom panel adopt aluminum panels with anodic oxidation treatment. |
|
Ladder |
A fixed ladder at the rear of the vehicle is to be provided for to the roof. |
|
Equipment/Devices/Parts Inside Of Frame |
The frame of equipment frame is used aluminum alloy material with inner-connecting technique to improve space utilization efficiency and changeability. According to the necessary of firefighting maneuver and operating procedure, all the accessory equipment are anti-corrosion, shockproof, anti-drop, anti-scratch with push or pull special fixture and in reasonable space arrangement, compact, solid fixture, bold marks, convenient access. |
|
Bumper |
The body equipped with bumper to withstand impact on the front and rear |
|
Material |
Heavy duty steel high rigidity frame structure |
|
Tow Hook |
2pcs(each one at front and rear) |
|
Tow Winch |
Make/Model USA CHAMPION/ N12000XF-24V Max. tow capacity: 12000bls(5.4tons) Diameter of rope: 10mm Length of rope: 38m Driven type: electrical Over-loading protection device installed on winch Operation: electrical Location: installed at front of vehicle |
|
Generator |
Make/Model: Honda/ER2500CX Rotated voltage: 230V Rotated power: 2kw Frequency: 50HZ Operation: Manual |
Piping & Coupling System
|
Coupling |
The Coupling comply to GOST Standard /International standard/ Equivalent |
|
Piping |
The piping all are stainless steel nondeformable rubber hoses and non-deforable plastics hoses |
Delivery Outlets & Suction Inlet
|
Outlets |
|
|
Quantities |
Four delivery outlets |
|
Equipped |
4 X Ø 2 ½ “equipped with ball valves and instantaneous female couplings, rear facing with each of 30 m 2 X Ø 2 ½ “fire pump to water tank filling connection with ball valves 1 X drain cocks of fire pump |
|
Water Circulation Arrangement |
|
|
Equipped |
Hydrant Connection for filling tank from external hydrant or tanker. Suction from water tank and delivery to outside through delivery outlets, water monitors. Suction from external source and delivery to the tank ot to the fire through delivery outlets, monitors and hose reel. |
|
Suction Inlet |
|
|
Equipped |
4 X Ø 4 ” Water tank to fire pump suction connection with butterfly valve of 3 m each 1 X Ø 4 ” round thread Inlet with blank cap , Strainer and chain lockable , rear facing |
Control ,Adjustment & Gauge
|
Control |
|
|
Equipped |
Operation of fire fighting vehicles made according to existing standards where all the controls are grouped and easily identifiable. Pump operation panel located on the rear of the vehicle, facing the rear, designed in a practical and easy to operate and maintenance. • Pressure gauge for discharge line • Vacuum gauge for suction line • Water tank level gauge • PTO On/Off indicator • RPM +/- for setting pump rotation (Throttle control) • Tank to pump control • Hydrant inlet and control valve • Compound gauge • Service hour indicator • Primer control • Foam proportioning control • Foam tank level gauge • Two delivery outlets • Panel lights and switch |
|
Gauge |
|
|
Standard gauge |
Fitted with all gauges, indicators, signals as necessary for efficient operation, battery charge indicator, water temperature, fuel oil pressure transmission gauge, as necessary for the efficient operation and maintenance. |
Electrical & Communication System
|
Lighting |
Two Spotlight in front of cabin. One Set of light on the control panel One Set of illumination lamps in equipment compartment and pump compartment Automatic switching on lighting system for the interior of cab, pump compartment and storage lockers when doors are opened. Headlamps are installed in the pump compartment and storage compartment. operating dashboard is equipped with lighting switch, indicator light, etc. It is convenient for observation |
|
Signaling Unit |
Two search lights will be provided in each on front and rear side of the vehicles. Built-in Siren with multiple tones in Light Bar LED light bar warming light with PA system mounted on top of cab roof. The Light bar covers the entire roof of the vehicles. |
|
Side Flashing Light |
A set of red and blue flashing lights are installed on both sides of the vehicle body. |
Painting
|
Finish |
The overall appearance is sprayed with fire-fighting red (R03) baking paint, consistent with the chassis. |
|
Color |
Chassis and body color are red, the interior of equipment box is light gray, frame of chassis is black, rims’ are silver, and front bumper is white. It meets the national standard GB/T3181. LOGO will be designed based on user’s requirement |
|
Marking |
3M reflective marking strips are added around the body and pedals |
Essential Accessories
|
Accessories |
i) Seat belts for driver and crew members ii) Speedometer and different necessary indicators iii) Cabin lights, headlights, working signal lights, tail and rear lights, turning signal lights, reverse warning lamps. iv) Fog light v) Heavy hydraulic jack with lever and air compressor for tyre vi) Radio/FM with mp3 and USB vii) Fully charged ABC type fire extinguisher (5 Kg each) provided in 2 nos. at suitable location. |
Tools & Accessories for Each Fire Truck
|
A set of tools as required for general maintenance is supplied with lockable tool box for the fire truck vehicle in suitable location |
|||
|
Item |
Item |
unit |
quantity |
|
1 |
Suction Wrenches |
Piece |
2 |
|
2 |
Suction Hose 4″ X 2.5 Meters With Aluminum Coupling |
Piece |
4 |
|
3 |
Suction Strainer |
Piece |
1 |
|
4 |
Standard Tool Kit Set |
Piece |
1 |
|
5 |
Foam Making Branch Pipe |
Piece |
1 |
|
6 |
Fire Man Axe With Insulated Handle |
Piece |
1 |
|
7 |
Fire Crown Bar |
Piece |
1 |
|
8 |
Fire Hook |
Piece |
1 |
|
9 |
Wire Mesh Basket |
Disc |
1 |
|
10 |
Wheel Chock |
Disc |
2 |
|
11 |
Nylon Rope 1/2″ X20m |
Piece |
1 |
|
12 |
Stop/Straight 21/2″ Jet/Spray Nozzle |
Piece |
2 |
|
13 |
Delivery Hose Ø 21/2″ X 30m With Aluminum Coupling |
Piece |
6 |
|
14 |
Rechargeable Hand-Held Lighting |
Piece |
1 |
|
15 |
Three-Way Diver Ø 21/2″ |
Piece |
2 |
|
16 |
Connector Ø 21/2″ |
Piece |
1 |
|
17 |
Aluminum Alloy Ladder Of 5 M Attached With Fire Truck |
Piece |
2 |
|
18 |
Generator 2000Watt And Spot Light 20 M With Heavy Duty Wire |
Piece |
1 |
|
19 |
Vertically sliding type LED spot light 2m from top of fire truck |
piece |
1 |
Hot Tags: multipurpose fire truck rhd, China, manufacturers, suppliers, factory, price, quotation, for sale, high quality, high performance
FAQs
Q: Are you a trading company or a manufacturing factory?
A: We are both. We have operated our own factory for over a decade and recently established a trading company to better serve our overseas customers. We welcome your inquiries and factory visits.
Q: What is your typical delivery time?
A: Our delivery time usually ranges from 20 to 50 days after receiving the advance payment. The exact timeline depends on the specific items and quantities in your order.
Q: How do you ensure product quality?
A: We maintain strict quality control standards through our ISO9001:2008 certified system. Additionally, our professional Quality Control team conducts thorough inspections to guarantee the excellence of our products.
Q: What are your payment terms?
A: We require a 40% deposit via T/T (Telegraphic Transfer), with the remaining 60% due before delivery. We will provide photos of the products and packaging for your approval before the final payment.
How are your trucks shipped?
A: Large trucks are typically shipped via RORO (Roll-On/Roll-Off) or bulk cargo ships. Smaller vehicles can be transported in containers. Please contact us for a detailed shipping quotation.
Q: Do you offer customized products?
A: Absolutely. We can design and manufacture customized products to meet your specific requirements.
Q: What kind of after-sales service do you provide?
A: We offer a five-year warranty on our products, covering manufacturing defects. If any quality issues arise within this period, we will repair or replace the product at our expense. For issues outside the warranty coverage, we provide after-sales service at the customer’s expense.