ISUZU 4×2 Truck Chassis
160hp Diesel Engine
5 CBM Debris Container
2-year Quality Guarantee
 |
 |
 |
 |
Description
FEATURES
ISUZU 4×2 Truck Chassis
160hp Diesel Engine
5 CBM Debris Container
2-year Quality Guarantee
Consists of stabilizer and lifting & lowering arms which are operated by hydraulic cylinders. For lifting and lowering, 4 chains on 2 arms are used whereas dumping is conducted by engaging additional 2 chains at lower pins while lowering. It comprises of one stabilizer roller that arrests overturning of truck while loading the container.
Effective and flexible method of handling debris/ garbage/ refuse
Powered by PTO of truck gear box by universal shaft
Have manually operated direction control valves
Facilitates convenient speedy method to remove garbage
Cost effective and economical
Easy to use and fast to operate with less number of individuals involved.
Designed in a easily way mounted upon dumper, tractor, truck for easy dumping on the ground or in other vehicles or containers.
Hydraulic cylinders attached for dumping the material on the ground make the whole process effortless.
Sturdy
Time saving
High performance
Time efficiency
SPECIFICATION
|
ENGINE |
Yuchai (Make)/ YC4E160-42 (Model) |
|
Type |
Vertical in line, 4 cylinders, Diesel Engine, Turbocharged & Aftercooled |
|
Max Output Power |
160hp (118kw) @2500rpm |
|
Max Torque |
600 (N.m)/ 1600 (rpm) |
|
Displacement |
4257 |
|
Emission Standard |
Euro 4 |
|
CAB |
Day Cab 2 seats, steel , Hardtop,60° tiltable |
|
CLUTCH |
Single, Dry Plate, Diaphragm ,Power Assist |
|
TRANSMISSION |
|
|
Gearbox Model |
HW18505TCL |
|
Type |
Floor-mounted, manual shift gear lever |
|
Gear Position |
1 3 5 |
|
Speed |
5+1 |
|
Max. Geared Speed |
95 km/h |
|
Power Take Off |
Manufacturer’s standard PTO box is provided |
|
Wheel Drive |
Rear two wheels drive with 4×2 wheel formula |
|
CHASSIS FRAME |
|
|
Structure |
Electrophoresis ;Heavy-duty double all steel constructed frame to be reinforced with cross members. |
|
Frame Sectional Modulus |
172mm*65mm*4+3mm |
|
STEERING BOX |
|
|
Type |
Hydraulic power assistance steering |
|
Drive Mode |
Left hand steering control |
|
SUSPENSION |
|
|
Front |
Double acting telescopic shock absorbers ,9 pcs spring |
|
Rear |
Second stage helper spring, 11+7 pcs |
|
AXLES |
|
|
Real Axle |
Rating 8590 kg; Hub reduction floating rear axle |
|
Front Axle |
Rating 3900 kg; Rigid I beam, Turning |
|
BRAKES |
|
|
Parking |
Mechanical release parking brakes |
|
Engine |
Foot-operated engine brake |
|
Service |
Power assisted hydraulic actuation service brakes built into all four wheels |
|
WHEELS |
|
|
Quantity |
6+1spare |
|
Tire Size |
9.00-20 (ALL WHEELS) |
|
16PR |
|
|
Lifting Capacity From Ground Level |
6,000 (Kg) |
|
Garbage Container Volume |
5 (cu.M) |
|
Useable Loading Capacity |
±5,600 (Kg) |
|
Standard Weight |
±2,050 (Kg) |
|
Pick up-time |
44 (s) |
|
Unloading-time |
36 (s |
|
Jack Legs Out/In |
﹤6(s) |
|
Fast off Load Empty Container |
13 (s) |
|
LOADING/ DISCHARGE SYSTEM |
|
|
System Comprised Structurers |
Lifting/ Tipping gear; Hydraulic Control System for the tipping/ lifting gear |
|
Lifting/ Tipping Gear Lifting Capacity |
5,600kg max |
|
Lifting/ Tipping Gear Constructions |
Compact all steel construction of beam with all welded joints to be of the continuous welding type. |
|
Lifting Beam Telescopic Jib Loading Heights |
1.2m approx. |
|
Locking/ Unlocking Device |
Fully automatic Locking/ Unlocking Device for securing container onto truck |
|
Guide Rollers |
Wear resistant guide rollers at the rear end of steel reinforced sub-frame. |
|
HYDRAULIC CONTROL SYSTEM |
|
|
Lift Cylinders |
2 (operation pressure 16Mpa) |
|
Hydraulic Pump |
Be driven from the PTO; Double acting Type |
|
Hydraulic Oil |
Full flow filtration of hydraulic oil offered. |
|
Pressure Limiting Valves |
Pressure limiting valves for controlling pressures |
|
Capacity Of Hydraulic Reservoir |
60L |
|
Operating Cycle Time |
(Loading dumping) at rated pump speed ≤60s@2000r/min.Unloading cycle time 20s@2000r/min. |
|
Dump Angle |
85 degree |
|
CONTAINER |
5 CBM |
|
Structurer & Type |
All steel construction and top-open type |
|
Construction |
Fully fabricated with auto-welded, construction done by using metal sheet plate. |
|
Material |
High carbon steel, 4mm thickness metal sheet plate, 6mm thick metal sheet plate |
|
Multiple Stacking |
Container designed for multiple stacking |
|
MEASUREMENT |
Measured by MM |
|
Wheelbase |
4,200 |
|
Length |
7,128 |
|
Width |
2,462 |
|
Height |
3,175 |
|
Front Overhang |
1,240 |
|
Rear Overhang |
1,688 |
|
WEIGHT |
Measured by KG |
|
Gross Vehicle Weight |
12,490 |
|
Truck Payloading |
5,995 |
|
Vehicle Weight |
6,300 |
Hot Tags: howo dumper placer garbage truck, China, manufacturers, suppliers, factory, price, quotation, for sale, high quality, high performance
FAQs
Q: Are you a trading company or a manufacturing factory?
A: We are both. We have operated our own factory for over a decade and recently established a trading company to better serve our overseas customers. We welcome your inquiries and factory visits.
Q: What is your typical delivery time?
A: Our delivery time usually ranges from 20 to 50 days after receiving the advance payment. The exact timeline depends on the specific items and quantities in your order.
Q: How do you ensure product quality?
A: We maintain strict quality control standards through our ISO9001:2008 certified system. Additionally, our professional Quality Control team conducts thorough inspections to guarantee the excellence of our products.
Q: What are your payment terms?
A: We require a 40% deposit via T/T (Telegraphic Transfer), with the remaining 60% due before delivery. We will provide photos of the products and packaging for your approval before the final payment.
How are your trucks shipped?
A: Large trucks are typically shipped via RORO (Roll-On/Roll-Off) or bulk cargo ships. Smaller vehicles can be transported in containers. Please contact us for a detailed shipping quotation.
Q: Do you offer customized products?
A: Absolutely. We can design and manufacture customized products to meet your specific requirements.
Q: What kind of after-sales service do you provide?
A: We offer a five-year warranty on our products, covering manufacturing defects. If any quality issues arise within this period, we will repair or replace the product at our expense. For issues outside the warranty coverage, we provide after-sales service at the customer’s expense.