Foam Dry Powder Fire Truck 4x4

Model Number: CSC5180GXFPM60
Chassis Available for 4×4, RHD
5000 lit water, 500 lit foam 500kg powder
CB40.10 fire pump
PF30 Monitor

Description

Foam Dry Powder Fire Truck 4×4

BRIEF:

Model Number: CSC5180GXFPM60

Chassis Available for 4×4, RHD

5000 lit water, 500 lit foam 500kg powder

CB40.10 fire pump

PF30 Monitor

General drawing of foam and powder fire truck for reference only

1. Description

Supply of Fire fighting Vehicle complete with standard firefighting and rescue accessories, mounted on the right-hand drive chassis and designed for effective firefighting in high-risk areas. Vehicle is capable of operating in tropical zones and on mountains terrain at high ambient temperatures. All components of vehicle have made of approved products with guarantee of absolute reliability and safety in performance. Vehicle design provides ease of operation and accessibility for repair and maintenance. Brand is Chinese.

Foam and powder fire truck equipped firefighting equipment’s, such as fire extinguished equipment, forcible entry rescue tool and so on. The body main structure is made by high quality steel and the equipment room is covered with shutter door and equips rescuer and personal protection device, which is based on the requirement.

The roof of foam and powder fire truck is equipped with a water and foam monitor and a dry powder monitor. With high power, features such as high speed and convenient operation; it can be widely used in large and medium-sized city public security fire brigades, petrochemical put out large-scale oil fires and general material fires in places such as industrial, industrial and mining enterprises, ports and docks. It is an ideal medium-sized fire-fighting equipment.

The fire performance of the fire truck meets the requirements of GB7956; the chassis has passed the national compulsory product certification. The fire pumps and fire monitors equipped have passed the inspection of the National Fire Equipment Supervision and Inspection Center; the fire interface meets the GB12514-2006 standard; the whole vehicle has passed the 3C certification and conforms to the truck. The relevant regulations on the license plate of the vehicle.

1. General Specifications

2.1 General
Model	CSC5180GXFPM60
Driving type	4×4, RHD
Overall size	8400x2500x3600mm (approx.)
G.V.W	20,000kg
Curb weight	13,000kg(approx.)
Full pay loading	6,500kg
Speed	95km/h
Wheelbase	4600mm
Front Axle Rated Loading	5tons
Rear Axle Rated Loading	10tons (speed ratio: 6.83)
Tire specs./No.	10.00R20 / 6+1spare tire
Fuel tanker	Aluminum tanker, 280L
Steering	Power steering
2.2 Engine
Brand	China Yuchai
Model	YC6A240 33
Horsepower	240HP
Displacement	7.255L
Type	6 Cylinder Diesel Engine, Water cooled, Direct injection, turbo charged intercool, suitable to operate in Pakistan
Rotated speed	2300rpm
Max. torque	900N.m
Emission standard	Euro3
Accessories	Hydraulic vehicle jack and wheel changing tool, spare wheel and tyre
2.3 Transmission
Brand	FAST
Model	10JS120
Synchronizer	with
Gears	10F+2R
2.4 Cabin
Structure	Flat, 4doors, double row of seats
Passenger No.	2+4 (1 driver plus 2 fireman + additional crew cab for 3 persons behind driver cabin)
Equipment	Besides original equipment on chassis，add：100W siren、long line fire lights、marker lamp、outline marker lamp、PTO and so on
Tilting type	Hydraulic tilting
Air condition	Air condition installed

2. Tankers’ Specifications

3.1 Water tank
Capacity	5000Liters
Material	High grade stainless steel
Thickness	6mm
Design	Suitable for roughest cross-country operations. Standard design of the tank includes inspection manhole, pressure & vacuum release, Overflow system, tank drain, electric tank level indicator, Baffle plates mounted inside the tank to prevent water rolling motion, suction sump with strainer, two hydrant filler inlets.
Structure	Exposed tanks, all metal welding structure, the overall corrosion resistance, have shock absorption measures
Equipped	1pc inlet hole with a quick lock/unlock, automatic pressure relief devices. 1pc overflow valve device, 1pc drain outlet with ball valve. 2pcs interface inlet holes at both sides with cover, 1pc inlet hole with valve.
3.2 Foam tank
Capacity	500Liters
Material	High grade stainless steel
Thickness	6mm
Design	Suitable for roughest cross-country operations, transport, and storage of all known brands of synthetic and protein-based foam compounds. Standard design of the tank includes inspection manhole, pressure & vacuum release, electric tank level indicator, suction line to the foam proportioning system, drain connection
Structure	Exposed tanks, all metal welding structure, the overall corrosion resistance, have shock absorption measures
Equipped	1pc inlet hole with a quick lock/unlock, automatic pressure relief devices, 1pc outflow hole, 2pc injecting hole with one-way valve
3.3 Powder tank
3.3.1 tanker
Capacity	500kg
Material	Q345R
Quantities	1pc
Standard	Designed, manufactured, and approved in accordance with China GB Regulations
Pressure	1.6Mpa
Working pressure	0.5~1.4Mpa
Rest rate	≤15%
3.3.2 CO2 system
Quantities	2pcs CO2 cylinders
Capacity	45kg per pc
Material	40Mn2
Highest work pressure	≥15Mpa
3.3.3 Powder monitor
Brand	China fire
Model	PF30
Rated power	≥25kg/s
Range	≥35m
Angle	-15°— +60°
3.3.4 Hose Reel
Design	Discharge through high pressure hose, wounded on hose reel with controlled discharged nozzle
Rated power	2.5kg/s
Range	≥12m
Length	30m
Quantities	1pc

3. Fire pump

Brand	China shanghai
Model	CB40.10
Type	Centrifugal, with 1 normal pressure and 3high pressure stages
Material	Corrosion resistant light alloy
Drive	By the vehicle’s engine via PTO
Capacity	3000 liter/min at 10 bar and 400 l/ m at 40 bar
Priming	Automatic priming System-vacuum pump
High pressure hose reel	2 x 30 m, with Fog- Nozzle and Guide Rollers
Outlet pressure	≤2.0 MPa
Max. depth of sucking water	7m
Max.vacuum	≥85kpa
Time of sucking water	≤60s
PTO	Sandwich PTO, splashing-type lubricate, with function of putting out fire when drive

4. Foam system

5.1 Water and foam monitor
Brand	China shanghai
Model	PL48
Capacity	3000 liter/min at 10 bar and 400 l/ m at 40 bar
Type	Combined for water and foam
Material	Corrosion proof
Control	Manual control
Angle	-15°— +70°
Range	Water: ≥65m Foam≥60m
Rotation angle	≥340°
5.2 Foam proportioning system
Brand	China Fire
Model	PHA125B
Capacity	1200~7500l/min
Pressure	0.6~1.2Mpa
Rato rate	1%~10%
Type	Electrical auto (with manual emergency)
Design	Automatic type making it possible to induct foam to the water at the correct Proportioning ratio, independent of pump pressure and discharge

5. Frame body

Overall layout	The front and two sides of the middle of the body are storage compartments. The aluminum alloy shutters are installed at both sides of the body and the back of the pump compartment. Ladder installed location based on client’s requirement.
Technological requirements	All welding panels and skeleton steels are through strict process of anti-rust and anti-corrosion. After completing welding of the tank, the tank will be clear up and removed possible defects such as empty solder. And then it will be through 24-hour hydrostatic test to assure no leakage.
Material	The outer frame of the body are all high quality Q235A(while water tank and foam tanks are stainless steel), the inner frame use high strength aluminum alloy, the bottom panel adopt aluminum panels with anodic oxidation treatment.
Door	The doors are aluminum alloy structure with locks which are good sealing and dustproof.
Equipment/devices/parts inside of frame	The frame of equipment frame is used aluminum alloy material with inner-connecting technique to improve space utilization efficiency and changeability. According to the necessary of firefighting maneuver and operating procedure, all the accessory equipment are anti-corrosion，shockproof, anti-drop, anti-scratch with push or pull special fixture and in reasonable space arrangement, compact, solid fixture, bold marks, convenient access.

6. Piping system

Suction piping	1pc DN135 quick suction hole at the rear of the pump room with filter screen and pneumatic Butterfly valve switch
Injection pipeline	2pc DN65 injection holes on both sides, 1 DN80 injection hole inside pump room
Outlet pipeline	4pc DN80 normal pressure outlets at the rear,2 DN65 medium pressure outlets at both side,1 DN135 pipeline in the pump room
Cooling pipeline	Cooling pipeline, control valve to cooling PTO
Cover	All inlet and outlet holes with covers

7. Fire control system dashboard

Display and control

Marks on all operation buttons, with pipeline layout and operation/maintenance illustration. Dashboard lays upper-left in the pump room with RPM/Vacuum/water pressure/liquid level indicator and lighting/valves control switches

PRM control of pump

Control in the drive cabin

Remote manual control in the pump room

Operation panel

Consist of fire pump, fire monitor ,pipeline system, system operation panel

8. Electrical & communication system

Traffic installation	In compliance with Pakistan highway codes, comprising head lights, brake / stop lights, traffic indicators, reverse lights and license plate lights
Illumination lights	Automatic switching on lighting system for the interior of cab, pump compartment and storage lockers when doors are opened. Headlamps are installed in the pump compartment and storage compartment. operating dashboard is equipped with lighting switch, indicator light.etc. It is convenient for observation.
Signal system	Two red rotating beacons on the cab roof, integrated public address system and siren. Long red light 1 piece, which is installed on the top of the cabin; Electronic alarm 1 piece, which is installed in the cabin; The control box is installed below in front of the driver
Search light	Two search lights with 70 watt halogen bulb, one in front of the cabin and one on the rear of the vehicle
Side flashing light	A set of red and blue flashing lights are installed on both sides of the vehicle body.
Main power	The vehicle battery is installed battery main switch.

9. Painting

Finish	The overall appearance is sprayed with fire-fighting red (R03) baking paint, consistent with the chassis
Color	Chassis and body color are red. It meets the national standard GB/T3181.
Marking	3M reflective marking strips are added; 3M reflective marking strips are added around the body and pedals

11.The accessories equipment list

Item	Item	unit	quantity
1	sucking hose	piece	4
2	water filter	piece	1
3	Water collector	piece	1
4	Adapter	piece	2
5	Adapter	piece	1
6	sucking pipe wrench	piece	2
7	fire hydrant wrench	piece	1
8	underground fire hydrant wrench	piece	1
9	water hose	disc	8
10	water hose	disc	4
11	straight stream nozzle	piece	1
12	diversion spray nozzle	piece	1
13	Foam nozzle	Piece	1
14	Foam nozzle	piece	1
15	Water distributor	piece	1
16	hose protector	pair	2
17	Fire spade		1
18	Fire crowbar		1
19	hose hook	piece	2
20	hose gaiter	piece	4
21	fire axe	piece	1
22	pickax	piece	1

Hot Tags: foam dry powder fire truck 4×4, China, manufacturers, suppliers, factory, price, quotation, for sale, high quality, high performance

FAQs

Q: Are you a trading company or a manufacturing factory?

A: We are both. We have operated our own factory for over a decade and recently established a trading company to better serve our overseas customers. We welcome your inquiries and factory visits.

Q: What is your typical delivery time?

A: Our delivery time usually ranges from 20 to 50 days after receiving the advance payment. The exact timeline depends on the specific items and quantities in your order.

Q: How do you ensure product quality?

A: We maintain strict quality control standards through our ISO9001:2008 certified system. Additionally, our professional Quality Control team conducts thorough inspections to guarantee the excellence of our products.

Q: What are your payment terms?

A: We require a 40% deposit via T/T (Telegraphic Transfer), with the remaining 60% due before delivery. We will provide photos of the products and packaging for your approval before the final payment.

How are your trucks shipped?

A: Large trucks are typically shipped via RORO (Roll-On/Roll-Off) or bulk cargo ships. Smaller vehicles can be transported in containers. Please contact us for a detailed shipping quotation.

Q: Do you offer customized products?

A: Absolutely. We can design and manufacture customized products to meet your specific requirements.

Q: What kind of after-sales service do you provide?

A: We offer a five-year warranty on our products, covering manufacturing defects. If any quality issues arise within this period, we will repair or replace the product at our expense. For issues outside the warranty coverage, we provide after-sales service at the customer’s expense.

Description

FAQs

Leave a Message