Truck With 5Ton Hoist Crane

Chassis Make Dongfeng Model KINGRUN
Truck with Crane CSCTRUCK Make
GVW.18000kg inclusive of payload
Right Hand Drive 4×2 ,4 wheels, RWD Chassis
Wheelbase (Distance between axles) 4700mm

Truck with 5Ton Hoist Crane

 

BRIEF

·       Chassis Make Dongfeng Model KINGRUN

·       Truck with Crane CSCTRUCK Make

·       GVW.18000kg inclusive of payload

·       Right Hand Drive 4×2 ,4 wheels, RWD Chassis

·       Wheelbase (Distance between axles) 4700mm

·       Forward Control steel Sleeper Cab

·       CUMMINS 210hp Euro 3 Diesel Engine

·       Power assistance Steering, Collapsible type, telescopic and tilt steering column with locking device

·       Transmission make Dongfeng configuration 6 speed forward, 1 speed reverse

·       Brakes air over hydraulic , dual circuits with parking, emergency brake.

·       Tires Radial all weather tread with 01 nos spare wheel same specs of vehicles installed tires along  with rim.

·       Haulage / Load Carrier Bay, 4000mm × 2300mm × 800mm

·       High Tensile Steel Box, floor thickness 8mm checked steel plate, side board 6mm corrugated steel.

·       Workshop repair manual, maintenance manual offered with truck.

·       Safety belts for cabin crew,

·       Front protection guard for light radiator

·       Spare wheel with holder

·       Front hook shock less

·       Font hook 3500kg

·       Trailer braking and elect plug sockets

·       Inside outside rear view mirror

·       Fire extinguisher provided inside the drivers cabin

·       Fully powered synchronized straight telescopic boom

·       5-Ton Telescopic Typed 4-stage Crane

·       Crane Make XCGM, Model SQ5SK3Q

·       04 nos of sections 01 fixed boom, 03 telecopic

·       Retracted length 3.62m

·       Extended Length 10.85m

·       Max. Lifting Height 12.8m

·       Max. Working Radius 11 m

·       Elevation by double -acting hydraulic cylinders

·       Hydraulic Motor Driven Winch

·       Steel Wire rope

·       Slewing hydraulic motor driven worm gear speed reduction contiguous 360° rotation

·       Automatic swing lock.

·       Crane Hook Block with hook drive and sheaves

·       Outrigger Hydraulically extendable sliders and jacks integral with crane.

·       Hydraulic System with oil cooler, filer and oil sump.

·       Crane Controls, operated from both side of the truck without cab support.

·       Wireless Remote control optional.

·       Safety Device as following

·       Load meter, over load alert with load indicator

·       PTO indicator lamp

·       Hook Safety Latch

·       Hydraulic Safety Valves, check and holding valves

·       Winch Over-winding alarm

·       Level Gauge

·       Anti-two-block with alarm

·       Audible Warning

·       External Warning Lamp for option

DETAILS

CRANE MECHANISM

SPECIFICATIONS

GENERAL   INFORMATION
Chassis   Type	Truck   mounted crane right hand dirved chassis
Drive   Mode	4×2
Wheelbase	4700mm
Truck   Bed Length	4.8m
Engine	190hp
Rear   axle ratio	5.571
Truck   length	7930mm
Truck   width	2500   mm
Truck   height	3450mm
Tread	Front   /1920mm Rear   /1860mm
Chassis   Tare Weight	9.58Ton
Gross   Vehicle Weight	18   Ton
Max   Driving Speed	98KM/h
Manufacturing   by	Dongfeng   Shiyan Factory
Loading   Type	Medium   duty
Front   bumper angle with ground Rear   bumper angle with ground	20° 15°
Front   forward to first axle distance Rear   end to last axle distance	1430mm 2470mm
ENGINE
Make	Dongfeng   Cummins
Model	ISDe210   30
Series	ISDE   Series
Cylinders	6   nos.
Fuel   Type	Diesel
Cylinder   Lineup	Vertical   in line
Displacement	6.7L
Emission   Standard	Euro3
Max   Output in kw	155KW
Max   Output in ps	210HP
Max   Torque	800N·m
Max   Torque at rpm	1400RPM
Output   at rpm	2500RPM
Engine   Type	Vertical   in-line, Electrical control system, High – pressure common – rail, DPF
Cabin	Flat   roof
Cab   Model	D530
Cab   Type	Sleeper   Cab
Passengers   Allowed	3Nos
Seats   and Sleeper Line	Front   driver / co-driver seats Sleeper   Line: one bed after seats
TRANSIMISSION
Make	Dongfeng
Model	DF6S900
Type	Manual
Forward	6   Nos.
Reverse	1   Nos.
TIRES, BRAKES,OIL TANKS
Tire   Size	10.00R20
Tire   Nos	6+1
Brake   Type	Air-brake
AXLE, SUSPENSIONS
Front   Axle Loading	6000KG
Rear   Axle Model	DENA   6T
Rear   Axle Loading	10000KG
Rear   Axle Ratio	5.571
Leaf   Spring Nos	8/10+8
Chassis   Frame	250×80×（7+4）mm
ABS	No
CARGO BOX
Length	4m
Width	2.3m
Height	0.8m
Bottom   Thickness	8mm
Side   Thickness	6mm
CRANE
Model	SQ5SK3Q
Make	XCMG
Crane   Type	Telescopic
Boom   Section	4
Winch	Hydraulic
Hook	Crane   hook block with hook drive
Outrigger	02   Nos of front Hydraulic Extendable sliding outriggers
Safety   Devices	Standard   Equipped
Control	Dual   side of truck , optional with remote control
Max   Lifting Capacity	5000   kg
Max   Lifting Moment	12.5   T.M
Power	18   kW
Hydraulic   Oil Flow	32   l/m
Hydraulic   Oil Pressure	20   Mpa.
Oil   Tank Capacity	90   L
Crane   Weight	2260   kg
Install   Space	900   mm
Rotation   Angle	360 o all   rotation

REFERENCE PHOTOS

Hot Tags: Truck With 5Ton Hoist Crane, China, manufacturers, suppliers, factory, price, quotation, for sale, high quality, high performance

FAQs

Q: Are you a trading company or a manufacturing factory?

A: We are both. We have operated our own factory for over a decade and recently established a trading company to better serve our overseas customers. We welcome your inquiries and factory visits.

Q: What is your typical delivery time?

A: Our delivery time usually ranges from 20 to 50 days after receiving the advance payment. The exact timeline depends on the specific items and quantities in your order.

Q: How do you ensure product quality?

A: We maintain strict quality control standards through our ISO9001:2008 certified system. Additionally, our professional Quality Control team conducts thorough inspections to guarantee the excellence of our products.

Q: What are your payment terms?

A: We require a 40% deposit via T/T (Telegraphic Transfer), with the remaining 60% due before delivery. We will provide photos of the products and packaging for your approval before the final payment.

How are your trucks shipped?

A: Large trucks are typically shipped via RORO (Roll-On/Roll-Off) or bulk cargo ships. Smaller vehicles can be transported in containers. Please contact us for a detailed shipping quotation.

Q: Do you offer customized products?

A: Absolutely. We can design and manufacture customized products to meet your specific requirements.

Q: What kind of after-sales service do you provide?

A: We offer a five-year warranty on our products, covering manufacturing defects. If any quality issues arise within this period, we will repair or replace the product at our expense. For issues outside the warranty coverage, we provide after-sales service at the customer’s expense.