SPECIFICATIONS – SEWER CLEANER
 |
 |
 |
 |
Description
SPECIFICATIONS – SEWER CLEANER
|
COMPONENT |
SPECIFICATION |
|
Engine |
Engine model WD615.69, SINOTRUK make, Diesel, turbo charged, water cooled |
|
Built for export tier III |
|
|
HP340 at 2200RPM |
|
|
Exhaust brakes |
|
|
Transmission |
AMT |
|
Model HW20716A, Make SINOTRUK |
|
|
Cab |
Two (2) man inclusive of driver |
|
Complete instrumentation & driving controls manage all truck function |
|
|
AM / FM Radio/CD player |
|
|
Air condition factory installed |
|
|
Fitted with 2kg fire extinguisher |
|
|
Fitted with LED Lighting |
|
|
Driver’s seat pneumatic suspension |
|
|
Steering |
Hydraulically powered |
|
Primary box located on right hand side of chassis |
|
|
Axle configuration |
6 x4 |
|
Front axle (non-driving) rated at 20943 lbs |
|
|
Rear tandem axles rated at 70547 lbs |
|
|
Braking System |
Full air with dual action actuators with spring brake acting on rear wheels |
|
Electrical Systems |
24 Volts |
|
Chassis |
Integral front frame extension to accommodate the following: · Hose reel · Operator’s station |
|
Frame Strength minimum 120,000 PSI |
|
|
Frame -Outer C – channel re-enforcement the entire length |
|
|
Operator’s station |
Rear mounted control box lockable & fitted with a viewing window |
|
Complete instrumentation and operating controls to manage all sewer cleaning and vacuum functions. This include the following: -Vacuum pump hour meter -Water pump hour meter -Hydraulic pressure gauge -Vacuum gauge -Water pressure gauge -Electric chassis engine throttle -Hose reel directional control -Water level display in control box -Low water level alarm shall be both audible and visible on top of control box -Remote control |
|
|
Front Mounted Hose Reel |
Hose Reel Capacity of 600’ minimum |
|
1” thermoplastic, flexible and kink resistant |
|
|
Rear Mounted Hose Reel Designed in such a way as to allow operator and maintenance personnel to open engine hood without the use of the truck engine |
|
|
Rear Mounted Hose Reel Traverse an arc of 180° across the work station and be equipped with an air brake to hold it in position |
|
|
Constructed from ¼” steel |
|
|
Footage counter be installed on the reel shaft with digital readout mounted at the operator’s station |
|
|
Driven via hydraulically powered gear box |
|
|
A deflector scoop installed below the hose reel to direct cooling air to the truck’s radiator |
|
|
Water Storage Tank |
Capacity of 1,500 gallons |
|
Cylindrical wrapped in shape and constructed of 3/16” thick Stainless steel 304 |
|
|
pressure tested and guaranteed to contain no leaks |
|
|
Equipped with a fill system using standard fire hose fittings |
|
|
have a 20” top mounted port for inspection |
|
|
mounted above the chassis frame rails to provide a flooded inlet for the water pump |
|
|
Debris Body |
Cylindrical in shape and constructed of 3/16” thick Stainless steel 304 |
|
have a dished forward tank head and dished rear door |
|
|
Capacity shall be 7yd3 minimum |
|
|
Material enter the debris body through a top mounted air-backed debris chute to reduce wear |
|
|
Rear door be equipped with four (4) independent, fully adjustable hydraulic locks, each of which be operated with an independent hydraulic cylinder |
|
|
Debris body |
Rear door open/close with two (2) hydraulic cylinders |
|
Debris body be equipped with 12” stainless steel float ball |
|
|
Shut off valve mounted at the front of the debris body |
|
|
Dump controls be located forward of the tank assembly |
|
|
Vacuum Pump |
JUROP (Italy) PVT1000 Roots type, rotary positive displacement pump with a rated capacity of 3,770CFM at 25.5”Hg |
|
engine driven via a transfer case |
|
|
fitted with cyclone separator with 20” chamber |
|
|
Silencer fitted with rain cap and bottom drain |
|
|
Vacuum relief valve is air operated |
|
|
Water Pump |
Make by URACA (Germany) Model of KD718, shaft driven via transmission mounted PTO |
|
triple X design with a discharge pressure of 2,465PSI at 87GPM |
|
|
triple X design with a discharge pressure of 2,465PSI at 87GPM |
|
|
Adjustable low pressure water spray gun with 50’x½” hose and quick disconnect fittings shall be installed at the rear of the Tank |
Hot Tags: vacuum sewer cleaner with jurop pump, China, manufacturers, suppliers, factory, price, quotation, for sale, high quality, high performance
FAQs
Q: Are you a trading company or a manufacturing factory?
A: We are both. We have operated our own factory for over a decade and recently established a trading company to better serve our overseas customers. We welcome your inquiries and factory visits.
Q: What is your typical delivery time?
A: Our delivery time usually ranges from 20 to 50 days after receiving the advance payment. The exact timeline depends on the specific items and quantities in your order.
Q: How do you ensure product quality?
A: We maintain strict quality control standards through our ISO9001:2008 certified system. Additionally, our professional Quality Control team conducts thorough inspections to guarantee the excellence of our products.
Q: What are your payment terms?
A: We require a 40% deposit via T/T (Telegraphic Transfer), with the remaining 60% due before delivery. We will provide photos of the products and packaging for your approval before the final payment.
How are your trucks shipped?
A: Large trucks are typically shipped via RORO (Roll-On/Roll-Off) or bulk cargo ships. Smaller vehicles can be transported in containers. Please contact us for a detailed shipping quotation.
Q: Do you offer customized products?
A: Absolutely. We can design and manufacture customized products to meet your specific requirements.
Q: What kind of after-sales service do you provide?
A: We offer a five-year warranty on our products, covering manufacturing defects. If any quality issues arise within this period, we will repair or replace the product at our expense. For issues outside the warranty coverage, we provide after-sales service at the customer’s expense.