Model NO.: 15 CBM Rear Loader Garbage Truck
Overall dimensions: 9,450*2,550*3,450mm
Chassis brand: SINOTRUK
Dustbin volume: 15CBM
Engine: SINOTRUK WD615.62
Horsepower: 266HP/196kW
Drive Wheel: 4×2
 |
 |
 |
 |
Description
BRIEF
The 15 cubic meters Refuse Garbage Truck, also known as a Compressed Garbage Truck, serves as a vital tool for the efficient collection and transportation of single-use, non-recyclable municipal solid waste, as well as commercial waste. This specialized vehicle is also deployed for the disposal of non-toxic, non-corrosive, and non-radioactive industrial garbage. Crafted using cutting-edge German technology, it embodies several noteworthy features that make it a standout choice in waste management.
At the heart of this vehicle’s design is its remarkable capacity to operate under high system pressure, delivering a substantial compression force. This exceptional performance leads to a significantly higher volume rate and an impressive loading capacity. This truck has the potential to increase the loading capacity by an astonishing 5 to 7 times compared to traditional waste collection methods.
The compressed garbage truck‘s advanced technology ensures the efficient compaction of waste materials, reducing the overall volume of refuse. This compacting action not only optimizes the use of available space within the truck but also minimizes the frequency of trips required for waste disposal. Such efficiency translates into substantial cost savings for waste management operations, as well as a reduced environmental footprint due to decreased fuel consumption and emissions.
Furthermore, its versatility allows it to handle a diverse range of waste types, from municipal solid waste generated by households to commercial waste produced by businesses. It provides a sustainable solution for waste disposal, aligning with modern environmental standards and regulations.
In conclusion, the 15 cubic meters refuse garbage truck, powered by German technology, stands as a testament to innovation in waste management. Its high-pressure system, remarkable compression force, superior volume rate, and substantial loading capacity make it an indispensable asset in the quest for more efficient and environmentally responsible waste collection and disposal processes.
FEATURES
1. Impressive Capacity: The “15 CBM Rear Loader Garbage Truck” boasts a substantial 15 cubic meter (CBM) capacity, making it ideal for efficiently collecting and transporting large volumes of waste. This generous capacity minimizes the frequency of trips to disposal sites, saving time and resources.
2. Rear Loader Design: This garbage truck features a rear loader design, which means it has a hydraulic mechanism at the back for lifting and emptying waste containers. This design enhances safety and productivity by allowing the operator to remain in the cab while the truck handles the loading process.
3. Efficient Waste Collection: The rear loader configuration is known for its efficiency in collecting waste from curbside containers. This feature is especially beneficial for municipal waste management services, as it streamlines the garbage collection process, reducing labor costs and minimizing disruption to traffic.
4. Durable Construction: The 15 CBM Rear Loader Garbage Truck is constructed with durability in mind. It typically features a robust chassis and body to withstand the rigors of daily garbage collection operations. This durability ensures a longer service life, reducing maintenance and replacement costs.
5. Environmental Benefits: With its large capacity and efficient collection process, this garbage truck contributes to environmental sustainability. Reducing the number of trips needed to transport waste, helps minimize fuel consumption and carbon emissions, making it an eco-friendly choice for waste management.
SPECIFICATION
| Vehicle Description | |
| Overall dimensions | 9,450*2,550*3,450mm |
| GVW | 18,000kg |
| Chassis brand | SINOTRUK |
| Traction type | 4*2 |
| Up-parts Specification | ||
| Dustbin volume | 15cbm | |
| Material & thickness | Side | 4mm Q345 |
| Bottom | 5mm Q235A | |
| Type of Rear garbage filler(Rear Turnover device) | 1. Hanging trash bin | |
| 2. Swing arm | ||
| 3. Dustpan | ||
| Control system | Electrically Controlled Hydraulic + Manual Hydraulic | |
| Type of compactor | Fill, push, and compression | |
| Garbage compact density | 0.9±0.05 T/cbm | |
| Sewage water tank | Rear | About 500L, on the bottom of the rear filler |
| Front | About 230L, on the front of the garbage van | |
| Max Compact | ≥141 KN | |
| Max push | ≥189 KN | |
| Tailgate ascending Angle | ~95° | |
| Cycle of loading | ≤40s | |
| Cycle of discharge | ≤45s | |
| Hydraulic pressure system working pressure | 16 Mpa | |
| PLC | Importation PLC (Programmable controller) | |
| Gear pump | Made in China | |
| Multi-way valve | Air controlled, Made in China | |
| Hydraulic oil cylinder | Made in China | |
| Hydraulic rubber hose | Made in China | |
| Chassis Description | |||
| Cab | Sleeper cabin, 2 seats with one bunk with A/C | ||
| all-steel forward control | 55 hydraulically tiltable to the front | ||
| Adjustable air driver’s seat | Adjustable rigid co-driver seat | ||
| with ventilation system | exterior sun visor | ||
| Stereo radio/USB interface | safety belts | ||
| adjustable steering wheel | air horn | ||
| with 4-point support fully floating suspension and shock absorbers bb | |||
| 2-arm windscreen wiper system with three speeds | |||
| Engine | Brand | SINOTRUK WD615.62 | |
| Model | Diesel: 4-stroke direct injection, 6-cylinder in-line with water cooling, turbo-char in and inter-cooling | ||
| Emission standard | EURO 2 | ||
| Displacement (L) | 9.726 | ||
| Horsepower | 266HP/196kW | ||
| No of cylinder | 6 | ||
| Maximum torque | 1100N.m @ 1,100~1,600rpm | ||
Hot Tags: 15 cbm rear loader garbage truck, China, manufacturers, suppliers, factory, price, quotation, for sale, high quality, high performance
FAQs
Q: Are you a trading company or a manufacturing factory?
A: We are both. We have operated our own factory for over a decade and recently established a trading company to better serve our overseas customers. We welcome your inquiries and factory visits.
Q: What is your typical delivery time?
A: Our delivery time usually ranges from 20 to 50 days after receiving the advance payment. The exact timeline depends on the specific items and quantities in your order.
Q: How do you ensure product quality?
A: We maintain strict quality control standards through our ISO9001:2008 certified system. Additionally, our professional Quality Control team conducts thorough inspections to guarantee the excellence of our products.
Q: What are your payment terms?
A: We require a 40% deposit via T/T (Telegraphic Transfer), with the remaining 60% due before delivery. We will provide photos of the products and packaging for your approval before the final payment.
How are your trucks shipped?
A: Large trucks are typically shipped via RORO (Roll-On/Roll-Off) or bulk cargo ships. Smaller vehicles can be transported in containers. Please contact us for a detailed shipping quotation.
Q: Do you offer customized products?
A: Absolutely. We can design and manufacture customized products to meet your specific requirements.
Q: What kind of after-sales service do you provide?
A: We offer a five-year warranty on our products, covering manufacturing defects. If any quality issues arise within this period, we will repair or replace the product at our expense. For issues outside the warranty coverage, we provide after-sales service at the customer’s expense.